SEBS

Ensoft-S® is our brand name for compounds based on saturated styrenic block copolymer SEBS (styrene-ethylene-butylene-styrene) and polyolefins mainly Polypropylene (PP). The compounds have excellent rubberlike elasticity and weathering resistance.  Ensoft-S® range can easily be self-colored with the use of proper MB or provided as pre-colored compounds. Typical properties of Ensoft-S® series are given below. 
* Hardness range from 5 Shore A to 60 Shore D
* Service Temperature: -50°C - +110°C (dynamic) -50- + 130°C (Static/Peak)
* Excellent ozone, UV and weather resistance due to saturated elastomeric phase
* Chemical resistance to many aggressive mediums
* Low compression set and good elasticity in a wide temperature range
* Adhesion to a broad range of polar and non-polar substrates such as PP, PA, ABS, PC, PS…
*Broad product range including soft touch, expandable, high temperature resistant, low compression set, Halogen Free FR and many other specialty grades.
* Ease of processing (no predrying is required) and recyclability

Product mix
S_150-160 Economical Series (High Filler Content)
S_130-140  Economical Series (Medium Filler Content)
S_ 151- 161  General Purpose Grades (High Filler Content)
S_131-141  General Purpose Grades (Medium Filler Content)
S _200   Adhesion Grades for Co-injection/extrusion
S_300-320 High Performance Grades
S_400  Transparent Grades
S_500  Flame Retardant Grades (Dioxine and Halogen Free)
S_600  Specialty Grades
S_700   High Temperature Resistant and Low Compression Set Grades
S_800  Expandable(Foaming) Grades
S_900  Food Approved Grades

Applications
Please refer to applications section for grade recommendations and further examples

Sector  Application
Automotive  Bellows, boots and grommets, air ducts and overmolded duct seals, lens gaskets, fender guards, sun visors, soft touch interior components
Appliance/Houseware  Overmolded grips for power tools, refrigerator seals, gaskets, anti-vibration parts, drainage/discharge hoses and fittings
Construction Co-extruded windows sealing profile, castor wheels, hoses
Electrical Molded-in seals for electrical components, wire and cable insulation and termination boots, connectors and housings
Sport & Leisure Diving fins, diving mask, bike handles, watch straps, grips
Miscellaneous Toothbrushes, gaskets, overmolded soft touch grips for tools, shower mats, wine corks, baby teethers and nipples