TPO

Enflex-O® is our brand name for compounds based on uncured ethylene/propylene (EPDM or EPM) rubber and Polypropylene (PP). These compounds have excellent toughness, moderate elasticity and good weathering resistance. Enflex-O® range can easily be self-colored with the use of proper MB or provided as pre-colored compounds. Typical properties of Enflex-O® series are given below.
* Hardness range from 60 Shore A to 65 Shore D
* Service Temperature:-40 - +120C (depending on the grade)
* Low density from 0.9 to 1.1 g/cm3, depending on the formulation
* Very good surface appearance
* Ease of processing (no predrying is required) and recyclability
* Good UV and Weathering resistance
* Fluid resistance
* Good adhesion to  polyolefins

Product mix
O _150-160 General Purpose Grades (High Filler Content)
O_130-140  General Purpose Grades (Med Filler Content)
O_400  Unfilled Translucent Grades
O_500  Flame Retardant Grades
O_600  Specialty Grades
O_900  Food Approved Grades
 

Applications
Please refer to applications section for grade recommendations and further examples

Sector  Application
Automotive Exterior trims, mats, air intake ducts, air bag covers, instrument and door panel parts, bumpers, gaskets, seals, bellows, liners
Appliance/Houseware Discharge chutes, organizers, drawer mats
Construction Co-extruded static sealing profile, roofing membranes, moisture seals
Miscellaneous Soft touch grips, sporting goods, lawn and garden equipment/tools, personal care